Call Today: 817-803-4444
DeSoto, Texas — Clements Electric Commercial and Residential Service
Dallas County • Est. 1849

Electrician in DeSoto, TX

Need an electrician in DeSoto, TX? Clements Electric provides same-day residential and commercial electrical service across DeSoto and Dallas County — repairs, panel upgrades, lighting, surge protection, standby generators, and EV chargers — from licensed Texas electricians (TECL #40628), 7 AM to 7 PM. 4.7★ Google rating from 520 reviews.

Licensed & Insured — TECL #406287:00 AM – 7:00 PM, Mon–FriVeteran-Owned Since 1982

Commercial Electrical Contractor in DeSoto

For businesses, property owners and general contractors in DeSoto: tenant finish-out, service and capacity upgrades, warehouse lighting, machine wiring and controls, priced from drawings or a site walk with a written scope. Licensed Texas electrical contractor, TECL #40628.

Electrical Services in DeSoto

ServiceWhat you get
Electrical repair & troubleshootingSame-day diagnosis, written flat-rate quote
Panel upgrades & replacementsCode-compliant, permit and inspection included
Whole-home surge protection$350–$850 installed, UL 1449-listed SPD
Cummins standby generatorsTypical 20kW whole-house: $13,500–$17,000 all in (estimate)
LED & recessed lightingResidential and commercial
EV charger installationLevel 2, sized to your panel

Why DeSoto Calls Clements

  • Licensed & insured: TECL #40628 · Master Electrician #214180
  • Veteran-owned, serving DFW since 1982
  • Same-day dispatch to DeSoto from our Grand Prairie hub, 7 AM–7 PM
  • Written flat-rate quotes before any work begins
  • Permits and city inspections handled for you

What Panel Work Costs in DeSoto

A 100-amp to 200-amp panel replacement in DeSoto typically runs $2,200–$4,800 all in, including the panel, breakers, permit, inspection and labor. That is a typical range, not your price. Panel prices vary with material costs, the size of the panel and service, and how complex the job is.

JobTypical price
Straightforward swap to a single 200-amp panel (from 100 amps), all in$2,200–$4,800
Meter base, service mast or grounding workIncluded in the quote when the service entrance needs it
400-amp service, or an added 200-amp panel feeding a separate building such as a shopQuoted after an on-site load calculation

Every DeSoto job gets a written flat-rate quote, or a detailed itemized one if you prefer, before work starts, and we coordinate the meter disconnect and release with Oncor Electric Delivery. How panel upgrades work

Permits & Power in DeSoto

Who issues the permit

Electrical permits for work in DeSoto are issued by the city, and it is the city that inspects the finished work. Requirements, fees and inspection scheduling differ from one DFW city to the next.

Clements Electric pulls the permit and schedules the inspection as part of the job. Texas Electrical Contractor TECL #40628.

Who owns the wires

Most DeSoto addresses are served by Oncor Electric Delivery.

This matters on a service or panel upgrade: the utility named on your electric bill is the one that has to disconnect and then release the meter before the new service can be energized. Worth checking your bill before scheduling, and we coordinate that call either way.

Solar Panels & a Standby Generator in DeSoto

If your DeSoto home has grid-tied solar, the solar has to connect on the utility side of the generator’s transfer switch, between the meter and the switch, so the generator can never feed the solar inverters. We explain why in adding a standby generator to a home with solar panels. How that connection is made depends on the utility that serves your address: Oncor Electric Delivery.

Oncor Electric Delivery (delivery utility)

  • Disconnect: A visible, lockable, labeled AC disconnect is required between the Oncor meter and every source of distributed generation, within 10 feet of the meter unless special placards are used. Oncor states that molded-case breakers are not an acceptable disconnect.
  • Meter socket: The meter socket is reserved for Oncor metering. No meter collars or other devices may be installed in it or between the meter and the socket.
  • Generator and transfer switch: The generator transfer switch must be installed on the load side of the meter base, never integrated with or in series with the meter. Oncor asks installers to confirm whether the transfer switch is open or closed transition.
  • Solar approval: Solar needs an Oncor interconnection application, and Oncor treats a system as certified when it meets UL 1741 and the applicable parts of IEEE 1547.

Sources: Oncor Electric Service Guidelines (February 2025), sections 100.01.18, 500.06 and 700; Oncor Residential/Small Commercial Project Requirements (May 2025). Checked 2026-09-30.

Frequently Asked Questions

Yes. Clements Electric runs same-day electrical service in DeSoto from 7 AM to 7 PM, dispatched from our Grand Prairie hub. Call 817-803-4444 to check today's availability.

Get Your Quote — DeSoto

Fast response from local DeSoto electricians. No obligation.

Or have us call you back in DeSoto

No obligation. We call from 817-803-4444, 7 AM to 7 PM Monday through Friday.

Licensed & Insured

Electrical Contractor TECL #40628

Veteran-Owned

Proudly serving since 1982

Same-Day Service

Mon–Fri · weekend emergencies

Need an Electrician in DeSoto?

Clements Electric has served DeSoto and the surrounding area since 1982. Our licensed, insured electricians are standing by for same-day service, emergency repairs, and accurate quotes.