Multifamily Electrical in Richardson, TX

It means a termination has been running hot under load, usually for a long time. Heat degrades the connection, the degraded connection runs hotter, and eventually the insulation gives up. It is a progressive failure, not a sudden one, which is why it is usually found during an assessment rather than after an outage. It needs attention promptly, but it does not automatically mean the whole service has to be replaced.

Almost never. Aluminum branch-circuit wiring is remediated at the terminations with approved connectors, unit by unit, without rewiring an occupied building. And aluminum feeder conductors in the service equipment are permitted and still installed today — they are only a problem when terminated incorrectly. Anyone quoting a full rewire on the strength of seeing aluminum has not looked closely enough.

That depends on the scope and it is one of the first things we establish, because it is what owners and residents actually care about. Main panel work is planned in phases to keep the number of affected units small at any one time, and the utility disconnect and meter release are coordinated in advance rather than on the day. You get the outage plan in writing before the work starts.

Yes. Clements Electric is a licensed Texas electrical contractor (TECL #40628) and pulls the permit and schedules the inspection as part of the job. Requirements differ from one DFW city to the next, and service equipment work is generally where cities pay the closest attention.

Yes, and it is usually the more useful way to do it. Properties built in the same period tend to have the same equipment and the same problems, so assessing several at once produces a prioritized list you can plan against a budget rather than a series of unrelated emergencies.