Do I need to be home during the panel upgrade?

Yes, someone over 18 needs to be present to provide access and sign off on the completed work. We also do a walkthrough with you after installation to explain the new panel, breaker labels, and any new features like surge protection.

Will upgrading my panel lower my electric bill?

Not directly — a new panel does not use less electricity. However, a modern panel enables energy-efficient upgrades (lighting upgrades, high-efficiency HVAC, smart thermostats) that do lower your bill. The real value is safety, capacity for future additions, and insurance compliance.

Can you upgrade a panel in an apartment or condo?

Yes, but the process differs from single-family homes. Multi-family buildings often have master meters and limited electrical rooms. Clements Electric coordinates with property management, HOAs, and the building's master electrician when applicable. Panel upgrades have been completed in condos across Uptown Dallas, Addison, and Fort Worth's Museum District.

Call Today: 817-803-4444|Same-Day Service Available

Allen, Collin County • Est. 1872

Electrical Panel Upgrades & Breaker Panel Replacement in Dallas–Fort Worth in Allen, TX

Clements Electric provides expert electrical panel upgrades and breaker panel replacements. we upgrade 100-amp to 200-amp service panels, replace outdated zinsco and federal pacific panels, and handle fuse box upgrades to modern breaker systems. in Allen, TX. Serving Allen homeowners and businesses with licensed, insured electricians since 1982. Same-day and emergency service available.

Call 817-803-4444 Schedule Service

Licensed & Insured24/7 Emergency ServiceVeteran-Operated

2,100+

Homes Serviced in Allen

49 min

Average Response Time

140+

Generators Installed

40+

Years in Allen Area

4.7(521+ Reviews)

“Clements Electric has been our go-to electrician in Allen for years. Fast, professional, and always fair.”

— Allen Homeowner

When Do You Need a Panel Upgrade?

Most Dallas–Fort Worth homes built before 1990 have electrical panels that are undersized for modern life. Here are the clear signs it is time to upgrade:

Your panel is rated for 100 amps or less and your home is over 2,000 sq ft

You have a Federal Pacific Electric (FPE) Stab-Lok panel — documented fire hazard

You have a Zinsco or Sylvania-Zinsco panel — breakers can melt onto the bus bar

You still have an old fuse box with screw-in fuses instead of breakers

Your breakers trip when you run the microwave and toaster oven simultaneously

You are adding a hot tub, pool, workshop, or home addition and need more capacity

You are installing a standby generator and need a generator-ready panel

Your home inspector flagged the panel during a sale or refinance

You smell burning near the panel or see scorch marks on breakers

You want to install a Level 2 charger (if applicable in future) and your panel cannot support the load

Our Panel Upgrade Services

Every aspect of panel upgrades from diagnosis to final inspection is handled in-house:

100-amp to 200-amp service upgrades with new meter base, service entrance cable, and grounding system

200-amp to 400-amp upgrades for large estates, home workshops, and properties with multiple structures

Federal Pacific (FPE) Stab-Lok panel replacement — full removal and safe disposal of hazardous panels

Zinsco and Sylvania-Zinsco panel replacement with modern Square D, Siemens, or Eaton panels

Fuse box to breaker panel conversion with modern AFCI and GFCI protection

Sub-panel installation for garages, workshops, additions, and pool equipment

Generator-ready panel installation with manual or automatic transfer switch provisions

Smart panel installation (Leviton Load Center) with Wi-Fi monitoring, circuit-level energy tracking, and remote breaker control

Aluminum wiring remediation when discovered during panel replacement

Whole-home surge protector installation at the panel to protect all circuits

Panel Upgrade Process: What to Expect

A panel upgrade is a significant project, but we minimize disruption and handle every detail:

Step 1 — On-site evaluation: We inspect your current panel, load calculation, wiring condition, and service entrance. We determine the correct amperage and panel model for your home's needs.

Step 2 — Written quote: A written, itemized quote with no hidden fees is provided. Quotes include the panel, breakers, permit, inspection, labor, and any necessary auxiliary work (meter base, grounding, etc.).

Step 3 — Permit pulling: We apply for the electrical permit with your city (Dallas, Fort Worth, Plano, Frisco, etc.). Most permits are approved within 24–72 hours.

Step 4 — Utility coordination: We schedule a temporary power disconnect with Oncor, TNMP, or CoServ. Power is typically off for 4–8 hours during the swap.

Step 5 — Installation day: Our two-person crew removes the old panel, installs the new panel with all new breakers, upgrades the grounding system, and reconnects every circuit with fresh wire landing.

Step 6 — Inspection: The city electrical inspector verifies code compliance. Clements Electric maintains a 99%+ first-pass rate.

Step 7 — Utility reconnect and testing: Power is restored, every circuit is tested, and we walk you through your new panel's features and labeling.

Panel Brands We Trust

Panels and breakers are sourced from the industry's most reliable manufacturers. Each brand has strengths depending on your priorities:

Square D QO — Industry standard for residential. Excellent breaker reliability, widely available, and inspectors know them well. Best overall value.

Square D Homeline — Budget-friendly residential line. Slightly lighter-duty than QO but perfectly adequate for most DFW homes.

Siemens — Robust engineering with excellent bus bar design. Great for homes with high harmonic loads (electronics, variable-speed HVAC).

Eaton CH — Premium residential panel with copper bus bars and the tightest breaker connection. Best for longevity and heavy loads.

Eaton BR — Budget-friendly alternative to CH with good reliability. Common in production home builds.

Leviton Load Center — The smart panel option. Wi-Fi connected, circuit-level energy monitoring, remote breaker control via app. Ideal for tech-forward DFW homeowners.

Panel Evaluation & Quote

Not sure if your panel needs upgrading? Licensed electricians at Clements Electric perform a thorough panel evaluation — inspecting your current panel, calculating your home's electrical load, identifying safety hazards, and recommending the right solution. If the panel is safe and adequate, you will hear that honestly. If it needs replacement, all costs are itemized upfront with no obligation and no pressure.

Neighborhoods We Serve in Allen

Downtown AllenTwin CreeksStonebridge CrossingWaterford ParksGlendover ParkAllen StationFairy Tale Park AreaUS 75 Corridor

Frequently Asked Questions

Most panel upgrades are completed in a single day (4–8 hours). Complex upgrades involving service mast replacement, meter relocation, or 400-amp service may take 1–2 days. Power is off during the swap, but we coordinate with your utility to minimize downtime.

Other Services in Allen

Whole Home Surge Protection in Dallas–Fort Worth in Allen Electrical Repairs in Dallas–Fort Worth in Allen Lighting Upgrades in Dallas–Fort Worth in Allen Outlets & GFIs Installation in Dallas–Fort Worth in Allen All Electrical Services in Allen

Electrical Panel Upgrades & Breaker Panel Replacement in Dallas–Fort Worth in Nearby Cities

Dallas Fort Worth Plano Frisco McKinney Arlington Irving Garland Mesquite Carrollton Richardson Grand Prairie

Get Your Electrical Panel Upgrades & Breaker Panel Replacement in Dallas–Fort Worth Quote in Allen

Fast response from local Allen electricians. No obligation.

817-803-4444 Book Appointment

Licensed & Insured

Master Electrician #TECL 28992

Veteran-Operated

Proudly serving since 1982

Same-Day Service

Available 7 days a week

About This Service

Expert electrical panel upgrades and breaker panel replacements. We upgrade 100-amp to 200-amp service panels, replace outdated Zinsco and Federal Pacific panels, and handle fuse box upgrades to modern breaker systems.

View General Electrical Panel Upgrades & Breaker Panel Replacement in Dallas–Fort Worth Page

About Allen

Collin County

Population: 111,000

Founded: 1872

View Allen City Page

Need Electrical Panel Upgrades & Breaker Panel Replacement in Dallas–Fort Worth in Allen? Call Now.

Clements Electric has served Allen and the surrounding area since 1982. Our licensed, insured electricians are standing by for same-day service, emergency repairs, and accurate quotes.

817-803-4444 Request Estimate

Coverage Check

Enter your ZIP code to see if we serve your area.