# EV Charger Installation DFW | Level 2 Home Chargers | Clements Electric

> Level 2 EV charger installation across Dallas-Fort Worth. Licensed electricians, permits handled, Tesla and J1772 compatible. Call 817-803-4444 for a free quote.

URL: https://clementselectric.com/service/ev-charger-installation

---

- Licensed & Insured — Electrical Contractor TECL #40628, Master Electrician #214180 | Call Today: 817-803-4444 | Same-Day Service Available # SERVICES GENERATORS FINANCING About Us CONTACT 817-803-4444 Level 2 Home EV Charging # Level 2 EV Charger Installation in DFW Level 2 EV charger installation across the Dallas-Fort Worth metroplex — Clements Electric installs Level 2 (240V) home EV chargers with NEMA 14-50 outlets, hardwired units, dedicated circuits, panel load checks, and professional garage mounting. All permitted and backed by 40+ years of licensed electrical work. Call 817-803-4444 Book Online Licensed & Insured — Electrical Contractor TECL #40628, Master Electrician #214180 Veteran-Owned, Since 1982 Same-Day & Emergency Service 7AM-7PM ## What's Included ### Level 2 (240V) charger installation NEMA 14-50 outlet or hardwired unit — your choice. ### Dedicated circuit & breaker New 50A breaker and properly sized wiring run from your panel. ### Electrical panel load check We verify your panel can safely handle the additional load. ### Permitting and inspection We handle all city permits and coordinate the final inspection. ### Indoor or outdoor garage mounting Clean, code-compliant installation with protected conduit. ## Works With All EVs & Chargers We install chargers for every major EV brand and charging hardware manufacturer. Whether you drive a Tesla, Rivian, Ford, Chevrolet, or Hyundai — and whether you own a ChargePoint, Wallbox, Tesla Wall Connector, or Grizzl-E — our licensed electricians handle the full installation. Tesla Rivian Ford Mustang Mach-E / F-150 Lightning Chevrolet Bolt / Silverado EV Hyundai Ioniq / Kia EV6 ChargePoint Home Flex Tesla Wall Connector Wallbox Pulsar Plus Grizzl-E Classic / Smart Emporia / JuiceBox / ClipperCreek ### May Need a Panel Upgrade? Many DFW homes built before 2000 have 100A or 125A electrical panels that may not support a dedicated 50A EV charger circuit. If your panel needs an upgrade, Clements Electric handles that too — we are the DFW leader in electrical panel upgrades with thousands of panels replaced since 1982. Learn About Panel Upgrades ### Typical Cost Most DFW Level 2 installations run $800–$2,500 depending on panel capacity and wiring distance. Simple installations near the panel cost less. Longer wiring runs, panel upgrades, or complex routing increase the total. Every job receives a written, itemized quote before work begins. ## Does Your Electrical Panel Have the Capacity? A Level 2 EV charger draws a dedicated 50A circuit — more than most household appliances. Homes with 200A panels and available breaker space can typically support a charger without issue, but many DFW homes built before 2000 still run on 100A or 125A panels that cannot safely carry the additional load. Older Federal Pacific or Zinsco panels must be replaced before any EV charger work begins. Clements Electric performs a free panel load assessment with every EV charger quote. If your panel needs an upgrade, we complete both the panel replacement and charger installation in a single coordinated project — no juggling multiple contractors. Explore Panel Upgrade Services ## EV Charger Installation by City Select your city to learn about Level 2 EV charger installation in your area — including local permitting, common panel conditions, and neighborhoods we serve. ### Grand Prairie EV charger installation in Grand Prairie , TX ### Arlington EV charger installation in Arlington , TX ### Mansfield EV charger installation in Mansfield , TX ### Cedar Hill EV charger installation in Cedar Hill , TX ### DeSoto EV charger installation in DeSoto , TX ### Duncanville EV charger installation in Duncanville , TX ### Kennedale EV charger installation in Kennedale , TX ### Forest Hill EV charger installation in Forest Hill , TX ### Burleson EV charger installation in Burleson , TX ### Crowley EV charger installation in Crowley , TX ### Lancaster EV charger installation in Lancaster , TX ### Midlothian EV charger installation in Midlothian , TX ### Waxahachie EV charger installation in Waxahachie , TX ### Red Oak EV charger installation in Red Oak , TX ### Pantego EV charger installation in Pantego , TX ### Dalworthington Gardens EV charger installation in Dalworthington Gardens , TX ## Frequently Asked Questions How much does a Level 2 home EV charger installation cost in DFW? Most DFW Level 2 installations run $800–$2,500 depending on panel capacity, wiring distance, and whether you choose a NEMA 14-50 outlet or a hardwired unit. A simple installation near the panel with available capacity is on the lower end. Longer wiring runs, panel upgrades, or complex routing increase the cost. Clements Electric provides written, itemized quotes before any work begins. Do I need a permit to install an EV charger in Texas? Yes. Most DFW cities require an electrical permit for a new dedicated 240V circuit installation. Clements Electric handles all permitting and inspection coordination as part of the installation service — you do not need to visit city hall or schedule inspections yourself. What is the difference between a NEMA 14-50 outlet and a hardwired EV charger? A NEMA 14-50 outlet is a 240V receptacle that you plug a portable charger into — flexible and compatible with any EV's included charging cable. A hardwired unit is permanently connected to your electrical system and typically delivers faster charging speeds (up to 48A vs. 32A with a plug-in). The hardwired option is cleaner looking and slightly more efficient, but the outlet offers more flexibility if you move or change chargers. Will my electrical panel support an EV charger? Homes with 200A panels and available breaker space can typically support a dedicated 50A EV charger circuit without issue. Homes with 100A–125A panels, or older panels from Federal Pacific or Zinsco, may need a panel upgrade. Clements Electric performs a free panel assessment as part of every EV charger installation quote. How long does EV charger installation take? A standard installation with the panel in or near the garage takes 2–4 hours. Installations requiring longer wiring runs, conduit work, or panel upgrades may take a full day. Same-day and next-day appointments are available across the DFW metroplex. ## Ready to Charge at Home? Call Clements Electric today for a free consultation on Level 2 EV charger installation. Same-day appointments available across the entire DFW metroplex. Written quotes, no hidden fees, fully permitted and inspected work. Call 817-803-4444 Book Online Certified residential electricians serving DFW since 1982. Veteran-owned, licensed, and insured. Licensed & Insured — Electrical Contractor TECL #40628, Master Electrician #214180 817-803-4444 office@clementselectric.com Services Electrical Repairs
- Lighting Upgrades
- Electrical Panel Upgrades
- Surge Protection
- Outlets & GFIs
- Generator Installation
- Level 2 EV Charger Installation Company
- About Clements
- Reviews
- Blog
- Service Area
- FAQ
- Contact Generators
- Generator Overview
- Generac Dealer
- Kohler Dealer Our Locations Headquarters

2100 S Great SW Pkwy #505

Grand Prairie, TX 75051 Veteran-owned DFW electricians since 1982. Licensed, insured, same-day service.

Licensed & Insured — Electrical Contractor TECL #40628, Master Electrician #214180

817-803-4444 office@clementselectric.com About Services Contact Reviews Blog FAQ Regulated by the Texas Department of Licensing and Regulation (TDLR), P.O. Box 12157, Austin, TX 78711 — 800-803-9202 / 512-463-6599, tdlr.texas.gov

We are committed to website accessibility. If you have any difficulty using this site, please call us at 817-803-4444 and we will be glad to assist you.

© 2026 Clements Electric. All rights reserved.

Privacy Policy Terms of Service